+
+
+
+
+
+
+ Password must contain at least 8 symbols
+
+
+
+ WPA2/3 pre-shared key, that is required to connect to the network.
@@ -431,17 +431,17 @@ exports[` Snapshot guest network. 1`] = `
+
+
+
+
+
+
+ SSID which contains non-standard characters could cause problems on some devices.
@@ -499,36 +499,36 @@ exports[` Snapshot one module enabled. 1`] = `
+
+
+
+
+
+
+
+
+
+
+ WPA2/3 pre-shared key, that is required to connect to the network.
@@ -536,22 +536,22 @@ exports[` Snapshot one module enabled. 1`] = `
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ The 2.4 GHz band is more widely supported by clients, but tends to have more interference. The 5 GHz band is a newer standard and may not be supported by all your devices. It usually has less interference, but the signal does not carry so well indoors.
@@ -611,51 +611,51 @@ exports[` Snapshot one module enabled. 1`] = `
+
+
+
+
+
+
+
+ Change this to adjust 802.11n/ac/ax mode of operation. 802.11n with 40 MHz wide channels can yield higher throughput but can cause more interference in the network. If you don't know what to choose, use the default option with 20 MHz wide channel.
@@ -663,25 +663,25 @@ exports[` Snapshot one module enabled. 1`] = `
+
+
+
+
+
+
+
+
+
+
+
+ The WPA3 standard is the new most secure encryption method that is suggested to be used with any device that supports it. The older devices without WPA3 support require older WPA2. If you experience issues with connecting older devices, try to enable WPA2.
@@ -920,22 +920,22 @@ exports[` Snapshot one module enabled. 1`] = `
+
+
+
+