BeesRoots::transid_max_nocache calls btrfs_get_root_transid() which
retrieves the transid of the root of the given Fd. Since the FS_TREE
(subvol 5) is the root of the subvol hierarchy, it will always have
the highest transid on the filesystem, and we do not need to look at
any others.
Also fix a bug where we pass BTRFS_FS_TREE_OBJECTID instead of the
file descriptor root_fd() to btrfs_get_root_transid(). If BEESHOME
is somewhere on the same btrfs filesystem, and there are no leaked FDs
at bees startup, then BTRFS_FS_TREE_OBJECTID (5) usually has the same
integer value as a valid file descriptor of some object on the filesystem
that has a regularly increasing transid value. If Fd 5 happens to be a
file in BEESHOME then bees itself drives the transid increments. This,
combined with the search of all subvol roots, hides the bug (unless Fd
5 gets closed somehow).
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
BeesContext::home_fd() is supposed to open $BEESHOME once and cache
the Fd for later calls; however, instead it was reopening a new Fd each
time it was called, and _also_ holding that Fd in a BeesContext member.
Fds clean themselves up when they are forgotten, so it was not leaking
per se, but it certainly had more open Fds than it needed to.
Check to see if we have m_home_fd open, and return that if so.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
LOGICAL_INO can trip over the btrfs slow-backrefs bug, resulting in
some very long in-kernel runtimes. If too many threads are executing
LOGICAL_INO then there may be no cores left on the system to run other
tasks.
Toxic extent detection is done by a very rudimentary algorithm which
can be confused by unrelated sources of latency within btrfs (especially
commit latency). The algorithm can also be confused by other threads
executing the LOGICAL_INO ioctl.
These are two good reasons to prevent any two threads in a single bees
process instance from executing LOGICAL_INO at the same time, so let's
do that.
It is possible to limit the number of threads executing LOGICAL_INO with
the -c and -C options; however, this also limits the number of threads
which can perform any operation, while only LOGICAL_INO (*) has such a
profound effect on the rest of system operation.
Also make the status message clearer about exactly when LOGICAL_INO is
executed, as opposed to merely waiting to acquire a lock before executing
the ioctl.
(*) or maybe FILE_EXTENT_SAME. The problem function that keeps showing
up in kernel stack traces is find_parent_nodes, which is called by both
the LOGICAL_INO and FILE_EXTENT_SAME ioctls. We'll try this change
first and see if it prevents any recurrences of forced watchdog reboots;
if it does not, then we'll limit FILE_EXTENT_SAME the same way.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
The ordering function for BeesCrawlState did not consider
root 292 inode 0 min_transid 2345 max_transid 3456
to be larger than
root 292 inode 258 min_transid 2345 max_transid 2345
so when we attempted to update the end pointer for the crawl progress,
the new state was not considered newer than the old state because the
min_transid was equal, but the new crawl state's inode number was smaller.
Normally this is not a problem because subvol scans typically begin
and end in separate transactions (in part because we don't start a
subvol scan until at least two transactions are available); however,
the cleanup code for the aftermath of the recent transid_min() bug can
create crawlers with equal max_transid and min_transid records.
Fix this by ordering both transid fields before any others in the
crawl state.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Due to an earlier bug some beescrawl.dat files will contain uint64_t
max as max_transid. This prevents any further scanning on the subvol
because there is no possibiity of having a real transid (or any other
uint64_t number) larger than uint64_t max.
If we detect a bad transid in beescrawl.dat, log a warning, then use
some more plausible value: either min_transid to repeat the previous
incremental crawl, or 0 to restart the subvol scan from the beginning.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
On a few test machines max_transid on subvols is getting set to
18446744073709551615 (aka uint64_t max).
Prevent transid_min() from ever returning this value.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
"saved" is used only during hash table correctness analysis, which is
normally not enabled at compile time, and requires source modification
to enable.
Remove the pointless copy and save a tiny bit of CPU.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
The 16MB hash table extent size did not serve any useful defragmentation
or compression purpose, and for very small filesystems (under 100GB),
16MB is much larger than necessary.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
systemd-coredumpctl collects core files for later analysis
with gdb. It's a convenient thing if the keys you use to encrypt
/var/lib/systemd/coredump are the same as the keys you use to encrypt
the filesystem where you're running bees.
Add it to the documentation just before the hand-rolled version.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Standard crash backtrace collection, plus $BEESSTATUS for the high-level
overview of what bees is doing.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Split the rather large README into smaller sections with a pitch and
a ToC at the top.
Move the sections into docs/ so that Github Pages can read them.
'make doc' produces a local HTML tree.
Update the kernel bugs and gotchas list.
Add some information that has been accumulating in Github comments.
Remove information about bugs in kernels earlier than 4.14.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
When package maintainers build from a tarball, the .git directory does
not exist to extract the version tag. Let's add a hack to work around
this issue and let them specify `BEES_VERSION="v0.y"` on the make
cmdline.
Github-Bug: https://github.com/Zygo/bees/issues/75
Signed-off-by: Kai Krakow <kai@kaishome.de>
Gentoo has officially merged the ebuild into portage as of:
https://github.com/gentoo/gentoo/pull/9925
Let's update the readme and get rid of the `contrib/gentoo-bees`
directory, so we have no potentially outdated information in the future.
Signed-off-by: Kai Krakow <kai@kaishome.de>
Now that the packaging preparations were merged, we should update the
ebuild to reflect the upstream master branch.
Signed-off-by: Kai Krakow <kai@kaishome.de>
ExtentWalker doesn't gain significant benefits from caching, and the
extra SEARCH_V2 ioctls were blamed for a 33% kernel CPU overhead by perf.
Reduce the number of extents to 16 in lieu of fixing the caching.
This gives a significant speed boost on CPU-bound workloads compared
to the original 1024--almost 40% faster on a single SSD with a filesystem
consisting of raw VM images mounted with compress=zstd.
This also seems to reduce LOGICAL_INO overhead. Perhaps SEARCH_V2 and
LOGICAL_INO were trying to lock the same extents, and interfering with
each other?
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
`grep -q something | grep -q something_else` will never find anything.
The for-loop is redundant anyways because `grep -l` can already work for
us. Let's replace this with a shorter and working version.
CC: Timofey Titovets <timofey.titovets@synesis.ru>
(fixes: commit 06d41fd "Rewrite beesd arg parser")
Signed-off-by: Kai Krakow <kai@kaishome.de>
The -g option limits the number of worker threads when the target load
average is exceeded. On some systems the load normally runs high, and
continuous bees operation is required to avoid running out of disk space.
Add a -G/--thread-min option to force at least some threads to continue
running.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
The task queue may already be full of tasks when the crawl task is
executed. In this case simply reschedule the crawl task at the
end of the current queue.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Add -g / --loadavg-target parameter to track system load and add or
remove bees worker threads dynamically to keep system load close to the
loadavg target. Thread count may vary from zero to the maximum
specified by -c or -C, and is adjusted every 5 seconds.
This is better than implementing a similar load average scheme from
outside of the process (though that is still possible) because the
in-process load tracker does not disrupt the performance timing feedback
mechanisms as a freezer cgroup or SIGSTOP would when controlling bees
from outside. The internal load average tracker can also adjust the
number of active threads while an external tracker can only choose from
the maximum or zero.
Also fix a bug where a Task could deadlock waiting for itself to exit
if it tries to insert a new Task after the number of worker threads has
been set to zero.
Also correct usage message for --scan-mode (values are 0..2) since
we are touching adjacent lines anyway.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Other btrfs utils use readahead() not posix_fadvise().
There does not appear to be a performance or correctness difference
between the three (none, posix_fadvise, or readahead()).
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Log messages were already labelled with log levels, but there was no
way to filter by log level at run time.
Implement the filter inside the bees process so it can skip evaluation
of the BEESLOG* arguments if the log messages would not be emitted.
Fixes: https://github.com/Zygo/bees/issues/67
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
When BEESLOGINFO is called multiple times it generates separate log
records that can be mixed up when multiple threads dedup.
Use a single BEESLOGINFO call for each dedup to prevent this.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
set() was broken and redundant. Calling hold() and discarding the
returned object has the correct effect.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
This commit squashes all the little changes from the previous
integration branch into one, adjusts to the new Makefile changes, and
introduces an overlay layout so that the contrib/gentoo-bees subtree
can be directly added as a Portage overlay to the system.
The following list contains the previous commit descriptions:
sys-fs/bees: Keyword tested architecture ~amd64
Bees was tested on this platform.
sys-fs/bees: Add kernel version checks
Add checking the kernel versions and write some info and/or warnings
before building and installing the package. Running bees on older
kernels may have some serious performance and stability impacts, let's
tell the user about it.
Closes#55
sys-fs/bees: Add metadata.xml
sys-fs/bees: There's no configure script
So, there's no point in calling "default".
sys-fs/bees: Simplify src_configure()
sys-fs/bees: Don't depend on markdown
It makes no sense to install both README.md and README.html, and we can
get rid of one dependency.
Dependencies: btrfs-progs is no longer a buildtime-only dep
It is actually needed by the bees service wrapper script, as pointed out
by Gentoo QA review.
sys-fs/bees: DOCS is not needed
"COPYING" is already covered by the licensing. The ebuild defaults
already include README*
sys-fs/bees: Make warnings exclusive
It was recommended by Gentoo QA to show only either one or another
warning, and change the texts accordingly.
sys-fs/bees: RDEPEND is not implicit
RDEPEND does not implicitly default to DEPEND. Let's explicitly set the
variable.
sys-fs/bees: IUSE=test is only needed for explicit dependencies
Thus, remove it.
Signed-off-by: Kai Krakow <kai@kaishome.de>
Make life easier for package maintainers by not forcing architecture or
compiler optimizations by default. E.g., Gentoo QA refuses to accept
both "-march=native" and "-O3". These are usually provided by the
package tooling.
Instead, we provide easily accessible templates in "makeflags".
Signed-off-by: Kai Krakow <kai@kaishome.de>
This forces us to depend on markdown which would be otherwise optional.
Most of the time it is sufficient to let package managers just install
the README.md file.
Signed-off-by: Kai Krakow <kai@kaishome.de>
Due to VPATH and how make resolves source paths, libcrucible.so ends up
with a hard-coded path to link against libuuid.so. Let's fix it by
turning the general rule into an explicit rule for libcrucible.so.
Signed-off-by: Kai Krakow <kai@kaishome.de>
Since systemd prefix it's own timestamps, we can unconditionally remove
timestamps when bees is executed by systemd.
Signed-off-by: Kai Krakow <kai@kaishome.de>
We should probably not put it into the objects list. Let's instead
explicitly put it as a depend of libcrucible.so.
This allows us to not use *.cc as a depend for .version.cc which makes
more sense as CRUCIBLE_OBJS is also explicitly defined and not built
from wildcards.
Signed-off-by: Kai Krakow <kai@kaishome.de>
This commit adds support for putting package configuration options into
header files. This is needed to prepare reading config files from /etc.
Signed-off-by: Kai Krakow <kai@kaishome.de>
This commit removes USR_PREFIX and introduces ETC_PREFIX instead. The
purpose of PREFIX is the installation prefix in the system, not the
installation destination. The latter one is what DESTDIR is used for.
This should clear up the confusion. PREFIX was already mis-used as
installation destination. But that doesn't mix well with how the make
targets are designed.
CC: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: Kai Krakow <kai@kaishome.de>
There's now a new make target called "install_tools" which would not run
by default on installation.
One can add "OPTIONAL_INSTALL_TARGETS=install_tools" into localconf to
install these by default.
fiewalk would be installed to sbin, as only root can run it, the other
goes to bin.
Gentoo can use this to optionally install these tools as a package
feature.
Signed-off-by: Kai Krakow <kai@kaishome.de>
Instead, introduce "make reallyall" and make it the default target. Now,
one can override the default target using localconf.
Needed for preparing Gentoo ebuild test behavior.
Signed-off-by: Kai Krakow <kai@kaishome.de>
