This commit adds log levels to the output. In systemd, it makes colored
lines, otherwise it's probably just a number. Bees is very chatty, so
this paves the road for log level filtering.
Signed-off-by: Kai Krakow <kai@kaishome.de>
Dependencies can be generated in parallel which can be much faster. It
also puts away the problem that for may fail multiple times in a row and
leaving behind a broken intermediate file which would be picked up by
successive runs.
Signed-off-by: Kai Krakow <kai@kaishome.de>
The mlock runs much faster, probably because the hash fetches are
doing most of the work that mlock does.
It makes bees startup latency for testing smaller, even if it takes more
time in absolute terms.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
There are two subvol scan algorithms implemented so far. The two modes
are unimaginatively named 0 and 1.
0: sorts extents by (inode, subvol, offset),
1: scans extents round-robin from all subvols.
Algorithm 0 scans references to the same extent at close to the same
time, which is good for performance; however, whenever a snapshot is
created, the scan of the entire filesystem restarts at the beginning of
the new snapshot.
Algorithm 1 makes continuous forward progress even when new snapshots
are created, but it does not benefit from caching and will force the
kernel to reread data multiple times when there are snapshots.
The algorithm can be selected at run-time using the -m or --scan-mode
option.
We can collect some field data on these before replacing them with
an extent-tree-based scanner. Alternatively, for pre-4.14 kernels,
we can keep these two modes as non-default options.
Currently these algorithms have terrible names. TODO: fix that, but
also TODO: delete all that code and do scans directly from the extent
tree instead.
Augment the scan algorithms relative to their earlier implementation by
batching multiple extents to scan from each subvol before switching to
a different subvol.
Sprinkle some BEESNOTEs on the Task objects so that they don't
disappear from the thread status output.
Adjust some timing constants to deal with the increased latency from
competing threads.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Distribute incoming extents across a thread pool for faster execution
on multi-core, multi-disk environments.
Switch extent enumeration model to scan extent refs consecutively(ish).
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
In both instances the code contained within (or the conditional
compilation surrounding it) is no longer controversial.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Remove some dead code because dedup-related deadlocks have not been
observed since Linux kernel v4.11.
Preserve rationale of remaining #if 0 block (why we do write/rename
instead of write/fsync/rename) so that people don't try to replace the
"missing" fsync() there.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
With kernel 4.14 there is no sign of the previous LOGICAL_INO performance
problems, so there seems to be no need to throttle threads using this
ioctl.
Increase the FD cache size limits and scan thread count. Let the kernel
figure out scheduling.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
BEESNOTE puts a message on the status message stack. BEESINFO logs a
message with rate limiting. The message that was flooding the logs
was coming from BEESINFO not BEESNOTE.
Fix earlier commit which removed the wrong message.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
This avoids PERFORMANCE warnings when large hash tables are used on slow
CPUs or with lots of worker threads. It also simplifies the code (no
locksets, only one object-wide mutex instead of two).
Fixed a few minor bugs along the way (e.g. we were not setting the dirty
flag on the right hash table extent when we detected hash table errors).
Simplified error handling: IO errors on the hash table are ignored,
instead of throwing an exception into the function that tried to use the
hash table.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
When a toxic extent is discovered, insert the offending hash/address/toxic
entry into the hash table.
When a previously discovered toxic extent is encountered, do nothing,
i.e. allow the offending hash/address/toxic entry in the hash table
to expire.
Previously both inserts were removed from the code, but the former one
is required. The latter prevents bees from forgiving toxic extents
(or any hash matching one) should they be relocated, deleted, or simply
become non-toxic.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
GCC 7 and higher turn a previous warning into an error for implicit
fallthrough. Let's hint the compiler that this is intentional here.
Signed-off-by: Kai Krakow <kai@kaishome.de>
(cherry picked from commit 270a91cf17783813edaa75fb9766858dcf8e1689)
GCC 7 and higher turn a previous warning into an error for implicit
fallthrough. Let's hint the compiler that this is intentional here.
Signed-off-by: Kai Krakow <kai@kaishome.de>
GCC 7 and higher turn a previous warning into an error for implicit
fallthrough. Let's hint the compiler that this is intentional here.
Signed-off-by: Kai Krakow <kai@kaishome.de>
Adjust bees to match changes in Chatter's interface.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit 66fd28830d42acbd837dfb08b89a1f9c05c6d474)
To make bees more friendly to use with syslog/systemd, we add an option
to omit timestamps from the log output.
Signed-off-by: Kai Krakow <kai@kaishome.de>
This commit adds a simple getopt options parser to show help. This can
be used as a boilerplate for adding more options later.
Signed-off-by: Kai Krakow <kai@kaishome.de>
After a few hundred subvol threads start running, the inode cache starts
to thrash, and the log gets spammed with messages of the form:
"open_root_nocache <subvolid>: <path>"
Ideally there would be some way to schedule work to minimize inode
thrashing. Until that gets done, just silence the messages for now.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
With many threads it is inconvenient to reassemble the elided parts of
the dedup src/dst and scan filenames output. Simply output them
unconditionally, and balance the line lengths.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
If we lose a race and open the wrong file, we will not retry with the
next path if the file we opened had incompatible flags. We need to keep
trying paths until we open the correct file or run out of paths.
Fix by moving the inode flag check after the checks for file identity.
Output attributes in hex to be consistent with other attribute error
messages.
There is no need to report root and file paths separately in the error
message for incompatible flags because we have confirmed the identity of
the file before the incompatible flag error is detected. Other messages
in this loop still output root path and file_path separately because
the identity of 'rv' is unknown at the time these messages are emitted.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
If you have a lot of or a few big nocow files (like vm images) which
contain a lot of potential deduplication candidates, bees becomes
incredibly slow running through a lot "invalid operation" exceptions.
Let's just skip over such files to get more bang for the buck. I did no
regression testing as this patch seems trivial (and I cannot imagine any
pitfalls either). The process progresses much faster for me now.
This helps identify causes of the "same physical address in dedup"
exception.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit cc7b4f22b5df3a1f52d27060ee8a6a3352b8cd10)
BLOCK_SIZE_MIN_EXTENT_DEFRAG, BLOCK_SIZE_MIN_EXTENT_SPLIT, and others
are no longer used. Remove them.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit a3d7032edaf5fc584412d0dcf8773f1cafa8f2dc)
Add time spent in file create and copy operations to the stats.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit f01c20f97269083175a74d1a1fd3ebaced2d9560)
A BEESTRACE closure could throw an exception. Trap those so we don't
end up in terminate().
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit 59660cfc00b9ca233eeb1a7cdf6df34a45a2deba)
Reads can block indefinitely due to bugs, low io priority, or poor
storage performance. Record the block origin data in the thread state
so we can see which reads are problematic.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit f56f736d28970a0f03ee887a5bd5515cc749d413)
This lets us use more default constructors.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit 8a932a632ff4602a0357ed5fbcd3f86b6bc50283)
Use () instead of [] when the respective end of the byte range touches
the beginning or end of the file. Also omit the '0' at beginning of
file.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit 3023b7f57a3003242bc770bcfe55f666227680ff)
Use a different character to make it easier to search for bytenr ranges
in the logs.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit d43199e3d6e6469264eb10de8b0a783f8573e0e8)
This will allow the default size limit for cache objects to be changed
with impunity.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
(cherry picked from commit 9daa51edaab44c02ce0917ff94b20683036d7594)
In gcc 7+ warning: implicit-fallthrough has been added
In some places fallthrough is expectable, disable warning
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Holding file FDs open for long periods of time delays inode destruction.
For very large files this can lead to excessive delays while bees dedups
data that will cease to be reachable.
Use the same workaround for file FDs (in the root_ino cache) that
is used for subvols (in the root cache): forcibly close all cached
FDs at regular intervals. The FD cache will reacquire FDs from files
that still have existing paths, and will abandon FDs from files that
no longer have existing paths. The non-existing-path case is not new
(bees has always been able to discover deleted inodes) so it is already
handled by existing code.
Fixes: https://github.com/Zygo/bees/issues/18
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Some whitespace fixes. Remove some duplicate code. Don't lock
two BeesStats objects in the - operator method.
Get the locking for T& at(const K&) right to avoid locking a mutex
recursively. Make the non-const version of the function private.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Before:
unique_lock<mutex> lock(some_mutex);
// run lock.~unique_lock() because return
// return reference to unprotected heap
return foo[bar];
After:
unique_lock<mutex> lock(some_mutex);
// make copy of object on heap protected by mutex lock
auto tmp_copy = foo[bar];
// run lock.~unique_lock() because return
// pass locally allocated object to copy constructor
return tmp_copy;
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
"s_name" was a thread_local variable, not static, and did not require a
mutex to protect access. A deadlock is possible if a thread triggers an
exception with a handler that attempts to log a message (as the top-level
exception handler in bees does).
Remove multiple unnecessary mutex locks. Rename the thread_local variables
to make their scope clearer.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
Add MADV_DONTDUMP to the list of advice flags.
There are now three flags which may or may not be supported by the
target kernel. Try each one and log its success or failure separately.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
The hash table statistics calculation in BeesHashTable::prefetch_loop
and the data-driven operation of the extent scanner always pulls the
hash table into RAM as fast as the disk will push the data. We never
use the prefetch rate limit, so remove it.
Signed-off-by: Zygo Blaxell <bees@furryterror.org>
